AquaMiser D225-II -C

Aqua Miser® Ultra Boss D225

Ultra High Pressure Water Blast Pump

• Pump pressures to 40,000 psi at 6.3 gpm
• 225 HP Tier 3 Diesel engine driven
• Dual mode or single tool operation
• Rotary Screw Air Compressor
• Touch screen Operator Controls with diagnostics
• BOSS Abrasive Injection System option
• Self contained – requires only a potable water supply
• Trailer mounted. Skid mounted units available

Category: Tags: , , , , , , , , ,



Product Documentation:

AquaMiser D225-II Spec sheet 10-13

   

Product Description

An “Ultimate” in our line of Aqua MiserĀ® high-pressure blasting/cleaning systems, the Aqua Miser Ultra BOSS model D225-III is a self-contained, 225 HP Tier 3 diesel engine driven, 40Kpsi mobile water blast system requiring only a potable water supply. A heavy duty rotary screw air compressor produces 50 cfm of air at 100 psi. The ultra-high pressure pump is capable of delivering pressures to 40,000 psi at 6.3 gpm in single tool mode or 3.1gpm per gun in the dual mode. At these lower flows there is much less thrust from the gun working against the operator. This directly relates to less fatigue and chance of injury. Also less water is required to complete the job. With trigger controlled clutch and throttle operation the direct drive pump engages only when the gun is activated – providing for the least amount of HP pump wear. Pressure is electronically maintained as the pump ramps to the programmed pressure set point, compensating for tip wear. The throttle automatically returns the engine to idle when the gun trigger is released. System operating conditions are computer monitored and automatically controlled to operator set parameters via a full color touch screen interface.

These systems are available as water only units or with our removable integrated BOSS Abrasive System for results that water alone cannot achieve. This low-volume, pressure fed system feeds virtually any abrasive media up to distances of 500 ft horizontally or 200 ft straight up. Abrasive stays dry until reaching the injection head where it mixes with the water and is evenly distributed into a wide fan pattern. Any type of abrasive can be used to meet your surface requirements, from baking soda for degreasing and delicate cleaning – eliminating the need for hand tools or hazardous chemicals, to harder abrasives for etching surfaces – to achieve results just like sandblasting without the dust!

Systems are trailer mounted and sling-liftable. Skid mounted units are also available.